Initial NV-KIT430W/830W configuration // Eseecloud App.

You must download the ESEECLOUD app from the appropriate app store.

You must register with an email address and a unique password for the app.

IMPORTANT:

Locate the procedure according to the version available on your recorder.
You must connect the recorder to a display/monitor to perform the initial configuration.
The cameras in the recorder kit are already pre-configured (no need to add them).

Now once registered, you must add the device as follows

You can locate the unique QR code of your recorder by following the following instructions using directly the connection to the recorder and mouse... You must connect a screen (monitor / TV).

By entering the network settings you can locate the unique QR code of the recorder

RECORDER VERSION 1

Enter the user admin and leave the password field blank, then click accept.

Now in the menu look for 'network configuration' and there you will see the unique QR code of the recorder, this is the code that you must scan with the Eseecloud App.

***Before scanning the QR code, check that the recorder is connected via network cable (RJ-45) to the Router***