Support

Manual reset of the NVS-VIDEOINTERCOM-2W // NVS-VIDEOINTERCOM-2W-KPAD Important note:Make sure the system is connected to the power supply.Verify that the monitor is connected to the outdoor panel ...

Procedure for recharging your SIM card through the Eseecloud app.  Important:The SIM card included with the camera offers 100MB free or 7 days of use, starting from the moment of activation.Before ...

Procedure to recharge SIM cards through the IMOU Life application.       Note: In step 4 you must enter the ICCID of the SIM, this number is located on one of the sides of the SIM card. Then you ...

Procedure to configure the repeater mode cameras of the KIT430W/830W for both versions.   If the cameras are too far apart, you can use the repeater or range extender mode to use a hop on a camera ...

Procedure to view the cameras on the Eufy web. You can view the cameras through the Eufy Web, but first you must generate the PIN through the Eufy APP. Perform the following instructions in the APP...

Procedure to recharge EIOT SIM card Once the free 100MB is used or 7 days have passed the card will be blocked, when this happens you must enter the following address of the EIOT CLUB provider to p...

Recording type configuration for Cameras - App Tuya Smart   The recordings can be configured to be -->> Continuous or by Events, as long as a memory card is available.   1. Settings 2. Recording Se...

Procedure to download camera recordings through the TUYA SMART application.   Then follow the instructions:      

Add NIVIAN Cameras - Tuya Smart App - ONVIF Protocol to NVR's   Notes: The camera must be added to the TUYA SMART APP. You must locate the IP in the recorder and add it, then enter the password as...

Procedure for formatting the Micro SD card in the TUYA SMART- APP camera       To format the SD card in a Nivian camera with yours Smart APP you have to access the camera settings by clicking on th...