Nivian - Pairing Remote Controls

Procedure to pair RF remote controls with the NV-REMOTEBOLT lock

• Press and hold the "Recoded key" pairing button on the lock for about 5 seconds until it beeps.
• Then press only one button on each remote control (it can be either the lock or unlock button). Repeat this process with each remote continuously without stopping between them.

• Once all remotes are paired, wait approximately 30 seconds before testing.

   

Note: In the lock image, the "Recoded key" button is shown on the right, and the "Manual or Automatic" switch is on the left. You can adjust the latter according to your needs:

• Manual: Only allows control via remotes, app, or manually.
• Automatic: The device will automatically lock after about 10 seconds.