Nivian - Link Mando from NVS-MINICURTAIN-WR-KIT

To link the remote control to the NVS-MINICURTAIN-WR-KIT in the Tuya Smart App, you must do the following:

Access the device settings in the Tuya Smart App:

• We proceed to link the 3 buttons of the controller: Open/Pause/Close.

1.  Enable the Add open button option:   Add "Open" Button

- When this option is enabled, the open button must be pressed on the remote control. "OPEN"

Note: When enabled the switch will turn blue, once the corresponding button is pressed on the controller, the switch will turn gray again. This means that the button on the controller has been linked correctly.

2. Enable the Add pause button option:  Add "Pause" Button

- When this option is enabled, the open button must be pressed on the remote control. "PAUSE"

3. Enable the Add Close button option:  Add "Close" Button

- When this option is enabled, the open button must be pressed on the remote control. "CLOSE"

Once the whole procedure is done, the 3 buttons of the remote control will work.